Estações de Pré-Tratamento Completas

Por motivos de segurança operacional o primeiro passo no tratamento de esgoto é geralmente o pré-tratamento mecânico do efluente para evitar problemas operacionais, como bloqueios, desgastes ou obstruções.

O pré-tratamento completo do efluente inclui:

  • Peneiramento fino
  • Tratamento de resíduos
  • Separação de areia
  • Classificação da areia
  • Separação e remoção de gorduras e graxas

Leia mais...Fechar

Nós desenvolvemos e fornecemos nossa primeira Estação Completa ROTAMAT® na década de 1980. Desde então, centenas de engenheiros consultores e operadores têm escolhido e instalado nossas Estações Completas devido a sua operação confiável, baixa manutenção e baixos requisitos de espaço.

Nossas Estações Completas têm melhorado continuamente e modelos e tamanhos adicionais foram lançados para oferecer aos operadores, as melhores soluções para suas necessidades especificas.

As nossas Estações Completas são de planejamento e instalação rápida e fácil, proporcionando considerável economia nos custos de construção.

Produtos

Downloads

Detalhes

Detalhes

1. Fine screening

Depending on the specific conditions and data, such as peak flow, screenings load and grit load, one of the following screens is selected:

2. Screenings treatment

  • All ROTAMAT® Screens above include a screenings press. Screenings washing with (optional) dewatering and compaction. Solids concentration of screenings is up to 45 % DS.
  • For our STEP SCREEN® SSF and Belt Screen EscaMax® a separate HUBER Screenings Wash Press WAP® is usually installed behind. Solids concentration of screenings, depending on the WAP type used is up to 50 % DS.

3. Grit separation
The grit channels of our ROTAMAT® Complete Plants are designed in accordance with international standards or the customer's specific requirements. The grit channels are availabe as aerated or optionally unaerated units. The selection of the grit channel type (aerated or unaerated) depends on various criteria, such as the storm/dry weather flow ratio or whether further grit treatment systems are planned.

4. Grit removal and discharge
The settled grit is collected from the bottom of the grit channel with a horizontal grit screw. An inclined grit screw conveys, agitates and dewaters the collected grit. The classified grit slides from the upper end of the inclined screw into a RoSF 4/t Grit Washer.

5. Grease separation and removal (optional)
Separation of fats and grease is only available when used with aerated grit channels. The grease is collected in a separate chamber with the partition between the grit trap chamber and grease chamber consisting of a slotted scum board. In contrast to many competitors, the floating fats and oils are skimmed off the water surface with a paddle scraper that is slowly pulled with a stainless steel rope. The paddle is shaped so that it removes virtually all floating matter from the grease trap. Anaerobic degradation of fat and grease, and therewith odor nuisance, is thus prevented.